Hello, Is it possible to write this flash type? I always get an error
(
Here is my log:
LibUsbDotNet version: 2.2.8.104
FlashcatUSB Script Engine build: 202
Welcome to FlashcatUSB interfacing software, build: 330
Running on: Microsoft Windows 7 Home Basic (32 bit)
Initializing EJTAG engine
Device connected in JTAG mode: 7,05
Error connecting to target board
Disconnected from FlashcatUSB
Initializing EJTAG engine
Device connected in JTAG mode: 7,05
JTAG: IR length set to 5
JTAG engine setup successfully
Detected CPU ID: 0x334917F IMP CODE: 0x800904
Manufacturer ID: 0xBF Part ID: 0x3349
EJTAG Version support: 2.0
Target device supports DMA mode
Checking for a device specific script to automatically load
Loading device specific script: BCM3349_JTAG.bcs
Loading script: BCM3349_JTAG.bcs
Setting device parameter (Intel Flash delay) to 0x32
Setting device parameter (AMD Flash delay) to 0x96
Setting device parameter (Memory Read Delay) to 0x32
Loaded CFI compatible flash device at: 0x1FC00000
Flash JEDEC ID: 01 7E1A00
Flash base address: 0x1FC00000
Flash description: Spansion S29GL032M (4 194 304 bytes)
Programming mode: AMD/Fujitsu x8/x16 interface (8 bit bus)
EJTAG command issued: 0x10000 result: 0x228310
Opened file for writing: Spansion_S29GL032M_00-3FFFFF-ram-ok-2.bin (binary hex format), total file size: 4 194 304 bytes
Write Flash operation complete!
4 194 304 bytes written in 113,661 seconds, 36 902 Bytes/s
Script file (BCM3349_JTAG.bcs) unloaded
Disconnected from FlashcatUSB
Initializing EJTAG engine
Device connected in JTAG mode: 7,05
JTAG: IR length set to 5
JTAG engine setup successfully
Detected CPU ID: 0x334917F IMP CODE: 0x800904
Manufacturer ID: 0xBF Part ID: 0x3349
EJTAG Version support: 2.0
Target device supports DMA mode
Checking for a device specific script to automatically load
Loading device specific script: BCM3349_JTAG.bcs
Loading script: BCM3349_JTAG.bcs
Setting device parameter (Intel Flash delay) to 0x32
Setting device parameter (AMD Flash delay) to 0x96
Setting device parameter (Memory Read Delay) to 0x32
Loaded CFI compatible flash device at: 0x1FC00000
Flash JEDEC ID: 01 7E1A00
Flash base address: 0x1FC00000
Flash description: Spansion S29GL032M (4 194 304 bytes)
Programming mode: AMD/Fujitsu x8/x16 interface (8 bit bus)
Opened file for writing: Spansion_S29GL032M_00-3FFFFF-ram-ok-2.bin (binary hex format), total file size: 4 194 304 bytes
Address 0x0: wrote 0x2 and read 0xFE (8169 mismatches)
Address 0x0: wrote 0x2 and read 0x0 (6961 mismatches)
Address 0x0: wrote 0x2 and read 0x0 (6961 mismatches)
Error: data verification at 0x0 failed!
Address 0x2001: wrote 0x2 and read 0x4F (7368 mismatches)
Address 0x2001: wrote 0x2 and read 0x4D (7366 mismatches)
Address 0x2001: wrote 0x2 and read 0x4D (7368 mismatches)
Error: data verification at 0x2000 failed!
Address 0x4001: wrote 0x0 and read 0x4D (6820 mismatches)
Address 0x4000: wrote 0x0 and read 0xFE (8191 mismatches)
Address 0x4E72: wrote 0x8C and read 0xFF (20 mismatches)
Error: data verification at 0x4000 failed!
Address 0x6001: wrote 0x30 and read 0x4F (6747 mismatches)
Address 0x6001: wrote 0x30 and read 0x4F (6747 mismatches)
Address 0x6001: wrote 0x30 and read 0x4F (6747 mismatches)
Error: data verification at 0x6000 failed!
Address 0x8000: wrote 0x80 and read 0x0 (6923 mismatches)
Address 0x8000: wrote 0x80 and read 0x0 (6925 mismatches)
Address 0x8000: wrote 0x80 and read 0x0 (6922 mismatches)
Error: data verification at 0x8000 failed!
Address 0xA000: wrote 0x6 and read 0xFE (8182 mismatches)
Pleas help !
Thank You
(Here is my log:
LibUsbDotNet version: 2.2.8.104
FlashcatUSB Script Engine build: 202
Welcome to FlashcatUSB interfacing software, build: 330
Running on: Microsoft Windows 7 Home Basic (32 bit)
Initializing EJTAG engine
Device connected in JTAG mode: 7,05
Error connecting to target board
Disconnected from FlashcatUSB
Initializing EJTAG engine
Device connected in JTAG mode: 7,05
JTAG: IR length set to 5
JTAG engine setup successfully
Detected CPU ID: 0x334917F IMP CODE: 0x800904
Manufacturer ID: 0xBF Part ID: 0x3349
EJTAG Version support: 2.0
Target device supports DMA mode
Checking for a device specific script to automatically load
Loading device specific script: BCM3349_JTAG.bcs
Loading script: BCM3349_JTAG.bcs
Setting device parameter (Intel Flash delay) to 0x32
Setting device parameter (AMD Flash delay) to 0x96
Setting device parameter (Memory Read Delay) to 0x32
Loaded CFI compatible flash device at: 0x1FC00000
Flash JEDEC ID: 01 7E1A00
Flash base address: 0x1FC00000
Flash description: Spansion S29GL032M (4 194 304 bytes)
Programming mode: AMD/Fujitsu x8/x16 interface (8 bit bus)
EJTAG command issued: 0x10000 result: 0x228310
Opened file for writing: Spansion_S29GL032M_00-3FFFFF-ram-ok-2.bin (binary hex format), total file size: 4 194 304 bytes
Write Flash operation complete!
4 194 304 bytes written in 113,661 seconds, 36 902 Bytes/s
Script file (BCM3349_JTAG.bcs) unloaded
Disconnected from FlashcatUSB
Initializing EJTAG engine
Device connected in JTAG mode: 7,05
JTAG: IR length set to 5
JTAG engine setup successfully
Detected CPU ID: 0x334917F IMP CODE: 0x800904
Manufacturer ID: 0xBF Part ID: 0x3349
EJTAG Version support: 2.0
Target device supports DMA mode
Checking for a device specific script to automatically load
Loading device specific script: BCM3349_JTAG.bcs
Loading script: BCM3349_JTAG.bcs
Setting device parameter (Intel Flash delay) to 0x32
Setting device parameter (AMD Flash delay) to 0x96
Setting device parameter (Memory Read Delay) to 0x32
Loaded CFI compatible flash device at: 0x1FC00000
Flash JEDEC ID: 01 7E1A00
Flash base address: 0x1FC00000
Flash description: Spansion S29GL032M (4 194 304 bytes)
Programming mode: AMD/Fujitsu x8/x16 interface (8 bit bus)
Opened file for writing: Spansion_S29GL032M_00-3FFFFF-ram-ok-2.bin (binary hex format), total file size: 4 194 304 bytes
Address 0x0: wrote 0x2 and read 0xFE (8169 mismatches)
Address 0x0: wrote 0x2 and read 0x0 (6961 mismatches)
Address 0x0: wrote 0x2 and read 0x0 (6961 mismatches)
Error: data verification at 0x0 failed!
Address 0x2001: wrote 0x2 and read 0x4F (7368 mismatches)
Address 0x2001: wrote 0x2 and read 0x4D (7366 mismatches)
Address 0x2001: wrote 0x2 and read 0x4D (7368 mismatches)
Error: data verification at 0x2000 failed!
Address 0x4001: wrote 0x0 and read 0x4D (6820 mismatches)
Address 0x4000: wrote 0x0 and read 0xFE (8191 mismatches)
Address 0x4E72: wrote 0x8C and read 0xFF (20 mismatches)
Error: data verification at 0x4000 failed!
Address 0x6001: wrote 0x30 and read 0x4F (6747 mismatches)
Address 0x6001: wrote 0x30 and read 0x4F (6747 mismatches)
Address 0x6001: wrote 0x30 and read 0x4F (6747 mismatches)
Error: data verification at 0x6000 failed!
Address 0x8000: wrote 0x80 and read 0x0 (6923 mismatches)
Address 0x8000: wrote 0x80 and read 0x0 (6925 mismatches)
Address 0x8000: wrote 0x80 and read 0x0 (6922 mismatches)
Error: data verification at 0x8000 failed!
Address 0xA000: wrote 0x6 and read 0xFE (8182 mismatches)
Pleas help !
Thank You