How to JTag TPlink TD-w8151N with flashcat?

H

hamed-pc

New Member

• 3/12/16

• #1

Hi
I need to do jtag ADSL modem TPlink model TD-w8151N

Please tell me How to do With flashcat

 

D3m0n

Administrator

Staff member

• 3/12/16

• #2

I don't see any visable jtag points on this picture only serial , and the Ralink chip is not supported in flashcat unfortunately.

 

H

hamed-pc

New Member

• 3/12/16

• #3

D3m0n said:

I don't see any visable jtag points on this picture only serial , and the Ralink chip is not supported in flashcat unfortunately.

Click to expand...

Hi
Thank's
ok . so this support only serial . RX. TX . VCC , GND pin in j401

 

D3m0n

Administrator

Staff member

• 3/12/16

• #4

Possibly yes ,, tell me what chip is located at U10 ?

 

H

hamed-pc

New Member

• 3/12/16

• #5

D3m0n said:

Possibly yes ,, tell me what chip is located at U10 ?

Click to expand...

u10 is en25qh6

 

H

hamed-pc

New Member

• 3/12/16

• #6

excuse me . this is ok u10 = en25qh16

 

D3m0n

Administrator

Staff member

• 3/12/16

• #7

Ok you should be able to connect to that chip to read/write . You will have to either use a clip or manually solder to the correct positions on the chip legs and use external vcc to power the chip .