Flash memory detected but not found in flash library

[eng.mas]

I'm using flashcatusb pro with latest software

I'm tring to read Micron Serial NOR Flash Memory MT25QU02GCBB

But I get this msg: Flash memory detected but not found in flash library

Welcome to the FlashcatUSB interfacing software, build: 643
Copyright 2023 - Embedded Computers LLC
Connected to FlashcatUSB Pro (PCB 5.x), firmware version: 1.17
Running on: Windows (64 bit)
FlashcatUSB Script Engine build: 312
Serial NOR memory database loaded: 499 devices supported
Serial NAND database loaded: 66 devices supported
Parallel NOR memory database loaded: 405 devices supported
Parallel NAND memory database loaded: 267 devices supported
OTP/UV EPROM memory database loaded: 46 devices supported
Voltage set to: 3.3V
Detecting connected Flash device...
Initializing SPI device mode
Attempting to detect SPI device (auto-detect mode)
Successfully opened device in SPI mode
Connected to SPI Flash (RDID:0x20BB22 REMS:0xFFFF)
Flash memory detected but not found in Flash library
Disconnected from FlashcatUSB Pro device
Connected to FlashcatUSB Pro (PCB 5.x), firmware version: 1.17
Voltage set to: 3.3V
Detecting connected Flash device...
Initializing SPI device mode
Attempting to detect SPI device (auto-detect mode)
Unable to detect compatible SPI device
Flash memory not detected on SPI NOR mode
Disconnected from FlashcatUSB Pro device
Connected to FlashcatUSB Pro (PCB 5.x), firmware version: 1.17
Voltage set to: 3.3V
Detecting connected Flash device...
Initializing SPI device mode
Attempting to detect SPI device (auto-detect mode)
Unable to detect compatible SPI device
Flash memory not detected on SPI NOR mode
Disconnected from FlashcatUSB Pro device
Connected to FlashcatUSB Pro (PCB 5.x), firmware version: 1.17
Voltage set to: 3.3V
Detecting connected Flash device...
Initializing SPI device mode
Attempting to detect SPI device (auto-detect mode)
Successfully opened device in SPI mode
Connected to SPI Flash (RDID:0x20BB22 REMS:0xFFFF)
Flash memory detected but not found in Flash library
Disconnected from FlashcatUSB Pro device
Connected to FlashcatUSB Pro (PCB 5.x), firmware version: 1.17
Voltage set to: 3.3V
Detecting connected Flash device...
Initializing SPI device mode
Attempting to detect SPI device (auto-detect mode)
Successfully opened device in SPI mode
Connected to SPI Flash (RDID:0x20BB22 REMS:0xFFFF)
Flash memory detected but not found in Flash library
Disconnected from FlashcatUSB Pro device
Connected to FlashcatUSB Pro (PCB 5.x), firmware version: 1.17
Voltage set to: 3.3V
Detecting connected Flash device...
Initializing SPI device mode
Attempting to detect SPI device (auto-detect mode)
Successfully opened device in SPI mode
Connected to SPI Flash (RDID:0x20BB22 REMS:0xFFFF)
Flash memory detected but not found in Flash library
Disconnected from FlashcatUSB Pro device
Connected to FlashcatUSB Pro (PCB 5.x), firmware version: 1.17
Voltage set to: 3.3V
Detecting connected Flash device...
Initializing SPI device mode
Attempting to detect SPI device (auto-detect mode)
Successfully opened device in SPI mode
Connected to SPI Flash (RDID:0x20BB22 REMS:0x0000)
Flash memory detected but not found in Flash library
Disconnected from FlashcatUSB Pro device
Connected to FlashcatUSB Pro (PCB 5.x), firmware version: 1.17
Voltage set to: 3.3V
Detecting connected Flash device...
Initializing SPI device mode
Attempting to detect SPI device (auto-detect mode)
Unable to detect compatible SPI device
Flash memory not detected on SPI NOR mode
Disconnected from FlashcatUSB Pro device
Connected to FlashcatUSB Pro (PCB 5.x), firmware version: 1.17
Voltage set to: 3.3V
Detecting connected Flash device...
Initializing SPI device mode
Attempting to detect SPI device (auto-detect mode)
Unable to detect compatible SPI device
Flash memory not detected on SPI NOR mode
Disconnected from FlashcatUSB Pro device
Connected to FlashcatUSB Pro (PCB 5.x), firmware version: 1.17
Voltage set to: 3.3V
Detecting connected Flash device...
Initializing SPI device mode
Attempting to detect SPI device (auto-detect mode)
Successfully opened device in SPI mode
Connected to SPI Flash (RDID:0x20BB22 REMS:0x0000)
Flash memory detected but not found in Flash library
Disconnected from FlashcatUSB Pro device
Connected to FlashcatUSB Pro (PCB 5.x), firmware version: 1.17
Voltage set to: 3.3V
Detecting connected Flash device...
Initializing SPI device mode
Attempting to detect SPI device (auto-detect mode)
Successfully opened device in SPI mode
Connected to SPI Flash (RDID:0x20BB22 REMS:0x0000)
Flash memory detected but not found in Flash library
Voltage set to: 1.8v
Voltage set to: 1.8V
Disconnected from FlashcatUSB Pro device
Connected to FlashcatUSB Pro (PCB 5.x), firmware version: 1.17
Voltage set to: 1.8V
Detecting connected Flash device...
Initializing SPI device mode
Attempting to detect SPI device (auto-detect mode)
Successfully opened device in SPI mode
Connected to SPI Flash (RDID:0x20BB22 REMS:0x0000)
Flash memory detected but not found in Flash library
Disconnected from FlashcatUSB Pro device
Connected to FlashcatUSB Pro (PCB 5.x), firmware version: 1.17
Voltage set to: 1.8V
Detecting connected Flash device...
Initializing SPI device mode
Attempting to detect SPI device (auto-detect mode)
Successfully opened device in SPI mode
Connected to SPI Flash (RDID:0x20BB22 REMS:0x0000)
Flash memory detected but not found in Flash library
Disconnected from FlashcatUSB Pro device
Connected to FlashcatUSB Pro (PCB 5.x), firmware version: 1.17
Voltage set to: 1.8V
Detecting connected Flash device...
Initializing SPI device mode
Attempting to detect SPI device (auto-detect mode)
Successfully opened device in SPI mode
Connected to SPI Flash (RDID:0x20BB22 REMS:0x0000)
Flash memory detected but not found in Flash library
Disconnected from FlashcatUSB Pro device
Connected to FlashcatUSB Pro (PCB 5.x), firmware version: 1.17
Voltage set to: 1.8V
Detecting connected Flash device...
Initializing SPI device mode
Attempting to detect SPI device (auto-detect mode)
Successfully opened device in SPI mode
Connected to SPI Flash (RDID:0x20BB22 REMS:0x0000)
Flash memory detected but not found in Flash library

 

[Pantheon]

I will add this Flash to the next software update.

You can add it yourself to the source code with this line:
FlashDB.Add(New SPI_NOR("Micron MT25QU02GC", SPI_1V8, Gb002, &H20, &HBB22) With {.SEND_EN4B = True, .SQI_MODE = QUAD})

In the FlashMemory.vb file (SPINOR_Database sub).

 

[eng.mas]

Okay, Thank you Pantheon

 

[eng.mas]

Dear@Pantheon,

Just wanted to say a quick thank you for the recent update. Successfully read the chip!

Impressed with the improvements. Great work!

Thanks again,

 

[Pantheon]

No problem.

 

[mirecek]

No problem.

Hello, would it be a problem to add AM29F800BB and M29F800DB to the memory library?
I would be very grateful to you, because of this memory I ordered a flashcat with accessories and unfortunately I won't get them.

thank you for answer,
Miroslav Valek Czech Republic

 

[D3m0n]

They are included in the Flash library already.

 

[mirecek]

They are included in the Flash library already.

Thank you for answer,
unfortunately, both memories say that they are not in the library.

this is M29F800B

Connected to FlashcatUSB XPORT, firmware version: 5.31
Detecting connected Flash device...
Initializing Parallel NOR device mode
I/O mode successfully initialized
Attempting to automatically detect Flash device
Mode NOR X16 (Byte addressing) returned ident code: 0xFF10FAFAFA
Mode NOR X8 (A0 addressing) returned ident code: 0x1000101010
Mode NOR X8 (A-1 addressing) returned ident code: 0x1000101010
Connected to Flash (CHIP ID: 0x1000101010)
Common Flash Interface information not present
Flash memory detected but not found in Flash library
Disconnected from FlashcatUSB XPORT device

 

[D3m0n]

Those ID codes are not correct , that is why it says not detected , make sure you have it aligned properly and your adapters are setup correctly.

 

[mirecek]

Can you think of anything I could be doing wrong? unfortunately, I don't have any manual for the correct assembly and the test memory on which I would try it was also not sent to me to test the correct function on them. the switch that is now on the FW is of course the standard switch to the app

 

[D3m0n]

I have not really used theses ISP adapters , but you may wish to try using an external VCC supply to power the 5v needed for these chips, and then putting pressure on the clip to make sure it is making a good connection.

 

[mirecek]

I have not really used theses ISP adapters , but you may wish to try using an external VCC supply to power the 5v needed for these chips, and then putting pressure on the clip to make sure it is making a good connection.

Hello, thank you for trying to help me and I'm sorry for not calling for a few days, I keep trying every now and then to make it work, but I can't. I tried the clip 360 function on the NAND memory and everything went without a problem here, so I tried an external power supply that gives more current and the problem is still the same, so I decided to remove the memory from the board and the problem is still the same. I have about 15 pieces of memory here and they all behave exactly the same I don't know what to do with it.