• Seems like hotmail /outlook is blocking emails from here so please refrain from using one of these accounts as you may not receive your authorization email.. many thanks

Flash Memory not detected in flash library.

AJMosley345

New Member
Trying to flash a 29F800BA-70PFTN chip with FlashcatUsb Xport, but as the title says it keeps saying "Flash Memory not detected in flash library."

Here is the full text log
FlashcatUSB Script Engine build: 306
Welcome to the FlashcatUSB interfacing software, build: 589
LibUsbDotNet version: 2.2.8.104
Running on: Microsoft Windows 10 Pro (64 bit)
Serial NOR memory database loaded: 392 devices supported
Serial NAND database loaded: 35 devices supported
Parallel NOR memory database loaded: 312 devices supported
Parallel NAND memory database loaded: 165 devices supported
OTP/UV EPROM memory database loaded: 16 devices supported
Connected to FlashcatUSB XPORT, firmware version: 5.12
Firmware features supported: SPI, I2C, EXTIO
Initializing EXT I/O hardware board
EXT I/O board successfully initialized
Attempting to automatically detect Flash device
Mode NOR X16 (Word addressing) returned ident code: 0xFFFFBFBFBF
Mode NOR X16 (Byte addressing) returned ident code: 0xFFFFBFBFBF
Mode NOR X8 returned ident code: 0xFF00BFBFBF
Connected to Flash (CHIP ID: 0xFF00BFBFBF)
Common Flash Interface information not present
For device support email contact@embeddedcomputers.net with the DEVICE ID

I switched it to 5v, but it still doesn't connect to it. Any help would be appreciated.
 
Top