• Visit https://www.embeddedcomputers.net/ for Hardware; Software and all other things related to FlashcatUSB

Flash Memory not detected in flash library.

AJMosley345

New Member
Trying to flash a 29F800BA-70PFTN chip with FlashcatUsb Xport, but as the title says it keeps saying "Flash Memory not detected in flash library."

Here is the full text log
FlashcatUSB Script Engine build: 306
Welcome to the FlashcatUSB interfacing software, build: 589
LibUsbDotNet version: 2.2.8.104
Running on: Microsoft Windows 10 Pro (64 bit)
Serial NOR memory database loaded: 392 devices supported
Serial NAND database loaded: 35 devices supported
Parallel NOR memory database loaded: 312 devices supported
Parallel NAND memory database loaded: 165 devices supported
OTP/UV EPROM memory database loaded: 16 devices supported
Connected to FlashcatUSB XPORT, firmware version: 5.12
Firmware features supported: SPI, I2C, EXTIO
Initializing EXT I/O hardware board
EXT I/O board successfully initialized
Attempting to automatically detect Flash device
Mode NOR X16 (Word addressing) returned ident code: 0xFFFFBFBFBF
Mode NOR X16 (Byte addressing) returned ident code: 0xFFFFBFBFBF
Mode NOR X8 returned ident code: 0xFF00BFBFBF
Connected to Flash (CHIP ID: 0xFF00BFBFBF)
Common Flash Interface information not present
For device support email contact@embeddedcomputers.net with the DEVICE ID

I switched it to 5v, but it still doesn't connect to it. Any help would be appreciated.
 
Back
Top