• Visit https://www.embeddedcomputers.net/ for Hardware; Software and all other things related to FlashcatUSB

FlashCatUSB xPort How To I2C & SPI EEPROMS

Lex-

New Member
Hello, I have a FlashCatUSB xPort, please let me know how to program the following devices:

ST24C08
ST95040

I discovered that is easy with FlashCatUSB Classic (more documented), unfortunately I purchased the FlashCatUSB xPort thinking that it support all the devices supported by the FlashCatUSB Classic and many more devices (NOR / NAND) because it include more pins / connections

Well, not problem, I think that the FlashCatUSB xPort is perfectly capable of program the mentioned devices (24Cxx, 950x0), only need to know where solder some wires, please help me.

Thank you.
 

Attachments

  • Flashcat USB xPort Test Points.jpg
    Flashcat USB xPort Test Points.jpg
    178.3 KB · Views: 105
Those holes you point out are "vias" used to connect a trace on the top of the PCB to one on the bottom.

As per the official xPort page its supposed to come included with a "10-pin port adapter adds full compatibility with FlashcatUSB Classic" unless you purchased it from another source.
 
Last edited:
Hello ricktendo, mine is original (I think exactly the pictured one) but second hand, can someone provide a picture or better a schematic of the "10 pin port adapter" please ?

Thank you.
 
i am trying to write a cpld but i am totally lost than doing n xport
 

Attachments

  • epm7032.png
    epm7032.png
    19.9 KB · Views: 70
Back
Top