Hi -- I can't seem to write anything using the XPORT. I can erase data, but writing always fails at 0x0. If I turn off "Verify Programming" -- it will proceed to write, but all my attempts have resulted in a 78% match to the original file. Any idea what I may be doing wrong?
Here is the log:
Welcome to the FlashcatUSB interfacing software, build: 643
Copyright 2023 - Embedded Computers LLC
Running on: Windows (64 bit)
FlashcatUSB Script Engine build: 312
Serial NOR memory database loaded: 499 devices supported
Serial NAND database loaded: 66 devices supported
Parallel NOR memory database loaded: 405 devices supported
Parallel NAND memory database loaded: 267 devices supported
OTP/UV EPROM memory database loaded: 46 devices supported
Connected to FlashcatUSB XPORT, firmware version: 5.29
Detecting connected Flash device...
Initializing Parallel NOR device mode
Parallel NOR mode successfully initialized
Attempting to automatically detect Flash device
Mode NOR X16 (Word addressing) returned ident code: 0x01FFAD0000
Mode NOR X16 (Byte addressing) returned ident code: 0x01FF000100
Mode NOR X8 (A0 addressing) returned ident code: 0x0100AD0000
Successfully detected device in NOR X8 (A0 addressing) mode
Connected to Flash (CHIP ID: 0x0100AD0000)
Common Flash Interface information not present
Flash detected: AMD AM29F016B (2,097,152 bytes)
Programming mode: Parallel I/O
Device interface: NOR X8 (5V)
Write mode supported: Standard
Flash device successfully detected and ready for operation
Opened file for writing: Seikendensetsu3_01.sfc, (size: 2,097,152 bytes)
Target Flash address: 0x00000000, bytes to write: 2,097,152 bytes
Address 0x0: wrote 0x4C and read 0x40 (14548 mismatches)
Address 0x0: wrote 0x4C and read 0x40 (14648 mismatches)
Address 0x0: wrote 0x4C and read 0x40 (15186 mismatches)
Data verification failed at 0x0
Here is the log:
Welcome to the FlashcatUSB interfacing software, build: 643
Copyright 2023 - Embedded Computers LLC
Running on: Windows (64 bit)
FlashcatUSB Script Engine build: 312
Serial NOR memory database loaded: 499 devices supported
Serial NAND database loaded: 66 devices supported
Parallel NOR memory database loaded: 405 devices supported
Parallel NAND memory database loaded: 267 devices supported
OTP/UV EPROM memory database loaded: 46 devices supported
Connected to FlashcatUSB XPORT, firmware version: 5.29
Detecting connected Flash device...
Initializing Parallel NOR device mode
Parallel NOR mode successfully initialized
Attempting to automatically detect Flash device
Mode NOR X16 (Word addressing) returned ident code: 0x01FFAD0000
Mode NOR X16 (Byte addressing) returned ident code: 0x01FF000100
Mode NOR X8 (A0 addressing) returned ident code: 0x0100AD0000
Successfully detected device in NOR X8 (A0 addressing) mode
Connected to Flash (CHIP ID: 0x0100AD0000)
Common Flash Interface information not present
Flash detected: AMD AM29F016B (2,097,152 bytes)
Programming mode: Parallel I/O
Device interface: NOR X8 (5V)
Write mode supported: Standard
Flash device successfully detected and ready for operation
Opened file for writing: Seikendensetsu3_01.sfc, (size: 2,097,152 bytes)
Target Flash address: 0x00000000, bytes to write: 2,097,152 bytes
Address 0x0: wrote 0x4C and read 0x40 (14548 mismatches)
Address 0x0: wrote 0x4C and read 0x40 (14648 mismatches)
Address 0x0: wrote 0x4C and read 0x40 (15186 mismatches)
Data verification failed at 0x0