Further speed improvements in logic:
Initializing EXT I/O hardware board
EXT I/O board successfully initialized
Attempting to automatically detect Flash device
Mode NAND X8 returned ident code: 0xC2F1809502
Successfully detected device in SLC NAND mode
Connected to Flash (CHIP ID: 0xC2F1809502)
Flash detected: MXIC MX30LF1G18AC (134,217,728 bytes)
Programming mode: EXT I/O (Parallel)
Flash page size: 2048 bytes (64 bytes extended)
Device interface: NAND (X8 3.3V)
NAND block manager disabled
NAND memory map complete: 65,536 pages available for access
Beginning memory read from MXIC MX30LF1G18AC
Start address: 0 (0x00) Length: 134,217,728
Read operation complete
Read 134,217,728 bytes in 28.845 seconds, 4,653,067 Bytes/s
Opened file for writing: FlashcatUSB.exe, (size: 12,457,472 bytes)
Target Flash address: 0x00000000, bytes to write: 12,457,472 bytes
Beginning memory read from MXIC MX30LF1G18AC
Start address: 0 (0x00) Length: 134,217,728
Read operation complete
Read 134,217,728 bytes in 29.042 seconds, 4,621,504 Bytes/s