• Visit https://www.embeddedcomputers.net/ for Hardware; Software and all other things related to FlashcatUSB

MX30LF2G18AC-TI detected but not found in Flash library

leevelo

New Member
Hi, I'm Leevelo.
My Flashcatusb mach do not recongnize the NAND flash MX30LF2G18AC-TI (MXIC) and show this message : Flash memory detected but not found in Flash library.

console log :
FlashcatUSB Script Engine build: 306
Welcome to the FlashcatUSB interfacing software, build: 592
LibUsbDotNet version: 2.2.8.104
Running on: Microsoft Windows 10 Enterprise (64 bit)
Serial NOR memory database loaded: 393 devices supported
Serial NAND database loaded: 46 devices supported
Parallel NOR memory database loaded: 320 devices supported
Parallel NAND memory database loaded: 168 devices supported
OTP/UV EPROM memory database loaded: 16 devices supported
Connected to FlashcatUSB Mach?, firmware version: 2.15
Voltage set to: 3.3V
Initializing Parallel mode
Parallel mode successfully initialized
Attempting to automatically detect Flash device
NAND clock speed set to: 20MHz
Mode NAND X8 ASYNC returned ident code: 0x0404040404
Mode NOR X16 (Word addressing) returned ident code: 0x9400949484
Mode NOR X16 (Byte addressing) returned ident code: 0x9400949484
Mode NOR X8 returned ident code: 0x9400949494
Connected to Flash (CHIP ID: 0x9400949494)
Common Flash Interface information not present
For device support email contact@embeddedcomputers.net with the DEVICE ID

If somebody can help me to resolve this problem.

Regards,

Leevelo
 
Back
Top