• Seems like hotmail /outlook is blocking emails from here so please refrain from using one of these accounts as you may not receive your authorization email.. many thanks

Need script for SB6180

D3m0n

Administrator
Staff member
Try this script it is untested , so make sure you have a full working backup before you try it ...
 

Attachments

xuhue

Member
Try this script it is untested , so make sure you have a full working backup before you try it ...
Button Hander::Calling Event: Done
Button Hander::Calling Event: WriteFirmware
Address 0x20000: wrote 0x33 and read 0xFF (65013 mismatches)
Address 0x20000: wrote 0x33 and read 0xFF (65013 mismatches)
Address 0x20000: wrote 0x33 and read 0xFF (65013 mismatches)
Error: data verification at 0x20000 failed!
 

Attachments

D3m0n

Administrator
Staff member
Ok tell me what version of fcusb are you using and what VCC setting do you have it on 3v or 5v ? I also need to know what softare version and firmware version you are using ..
The script you mentioned is obviously from a 6120 and yours being a 6180 , it has the same size chip so to speak , but your data is is in different locations so if you read/write the same section you have just dumped it will work , but if you actually tried to write a new firmware image it would fail.
 

D3m0n

Administrator
Staff member
Ok something doesn't add up here ,, you posted an 8MB dump but your flash is only 4MB how did you extract your dump ? NT or FCUSB ? Can you get your device back to a working state jusy by flashing your working backup dump ? If you can then extract a full dump using fcusb spi flash tab
 

xuhue

Member
with FCUSB script sb6120. I try flash it with Force and all light on can't connect to the modem and rewrite full dump and come back normal
 

D3m0n

Administrator
Staff member
Looking into this as the script works on older versions of the software , so waiting to hear from the developer on this
 

D3m0n

Administrator
Staff member
Ok i have tested this script with a brand new v2.1 programmer using build392 and firmware version 4.10 and it works , so it seems to be an issue with build404 software , try 392 and v4.10 and let me know if the script works ok for you
 

xuhue

Member
Ok i have tested this script with a brand new v2.1 programmer using build392 and firmware version 4.10 and it works , so it seems to be an issue with build404 software , try 392 and v4.10 and let me know if the script works ok for you
yes it work for me which one do you recommend force or hax for this ?
 

D3m0n

Administrator
Staff member
Sorry I do not have any information regarding modified firmware for this device.
 
Top