• Visit https://www.embeddedcomputers.net/ for Hardware; Software and all other things related to FlashcatUSB

Need script for SB6180

xuhue

Member
D3mom can you make a script for this
here is full flash i hop you can make a script for this
upload_2016-12-16_0-10-53.png
 

Attachments

  • FullFlash.rar
    5.2 MB · Views: 21
Try this script it is untested , so make sure you have a full working backup before you try it ...
 

Attachments

  • SB6180_SPI.rar
    1.1 KB · Views: 22
Try this script it is untested , so make sure you have a full working backup before you try it ...
Button Hander::Calling Event: Done
Button Hander::Calling Event: WriteFirmware
Address 0x20000: wrote 0x33 and read 0xFF (65013 mismatches)
Address 0x20000: wrote 0x33 and read 0xFF (65013 mismatches)
Address 0x20000: wrote 0x33 and read 0xFF (65013 mismatches)
Error: data verification at 0x20000 failed!
 

Attachments

  • Capture.PNG
    Capture.PNG
    5 KB · Views: 28
i can read and write ok with that
 

Attachments

  • SB6180-Read from -6120-proper.bcs.rar
    10.5 MB · Views: 23
Ok tell me what version of fcusb are you using and what VCC setting do you have it on 3v or 5v ? I also need to know what softare version and firmware version you are using ..
The script you mentioned is obviously from a 6120 and yours being a 6180 , it has the same size chip so to speak , but your data is is in different locations so if you read/write the same section you have just dumped it will work , but if you actually tried to write a new firmware image it would fail.
 
yes I write a new firmware image it was fail
 

Attachments

  • SB61XX.jpg
    53.5 KB · Views: 13
  • firmware.PNG
    firmware.PNG
    31.8 KB · Views: 34
FYI: I can read and write some was fail
 

Attachments

  • FCUSB.console.log.txt
    1.6 KB · Views: 6
  • 6180.PNG
    6180.PNG
    10.6 KB · Views: 26
  • 6180-script.PNG
    6180-script.PNG
    9.2 KB · Views: 23
Ok something doesn't add up here ,, you posted an 8MB dump but your flash is only 4MB how did you extract your dump ? NT or FCUSB ? Can you get your device back to a working state jusy by flashing your working backup dump ? If you can then extract a full dump using fcusb spi flash tab
 
with FCUSB script sb6120. I try flash it with Force and all light on can't connect to the modem and rewrite full dump and come back normal
 
here every thing that I were read B4
chip 16pin lay out pin same as sb6120 but I use 3.3v to pin 2 and pin2 from FCUSB to pin1
 

Attachments

  • SB6180-B077AC8F2E8.rar
    18.4 MB · Views: 15
Looking into this as the script works on older versions of the software , so waiting to hear from the developer on this
 
Ok i have tested this script with a brand new v2.1 programmer using build392 and firmware version 4.10 and it works , so it seems to be an issue with build404 software , try 392 and v4.10 and let me know if the script works ok for you
 
Ok i have tested this script with a brand new v2.1 programmer using build392 and firmware version 4.10 and it works , so it seems to be an issue with build404 software , try 392 and v4.10 and let me know if the script works ok for you

yes it work for me which one do you recommend force or hax for this ?
 
Sorry I do not have any information regarding modified firmware for this device.
 
Back
Top