No scripts to run (pls help me!!!)

[ArGeX]

Hi,

I have BSUSB-PSB1.8 ... I make the connection to the modem sb6120. Then, load the script, choose SB6120_SPI.bcs. But it does not open in a new window 6120 ... Information on this subject, and I would ask your help ..

Best Regards,

 

[D3m0n]

Was any other firmware loaded onto this device beforehand ?

 

[ArGeX]

1.09, 6.01, 6.03, 7.05 16K -32K tried with firmwares .. I got the same error...

I bought the modem used... there is a modem in the original software.
I did not install any other firmware to this modem.
Now I'm trying to install the firmware for the first time ...

The only problem is, when I load script does not sb6120 new window.

I have tried on three different computers.,
I've tried different versions of the program blackcat usb.
But always got the same error.

This error is caused by that software? operation or on the connections or devices? ...

New learning. Waiting for your help, thnks

 

[ArGeX]

please somebody help me

 

[D3m0n]

Sorry for late reply , but i am still out of the country , so access to net is limited where i am.
It seems as if original firmware is not on this device ,, a lot of the issues like this is basically down to the script itself looking for a certain setting , Try and get me a full dump of your device and PM it to me , so i can verify this.

 

[ArGeX]

thanks for the reply...

I've got a full dump from modem...

Have ForceWare full dump for Sb6120 ? (full flash image .bin 8mb) orCan you take a full dump Forceware installed modem sb6120?

I can read and write full dump.. (Spi Flash)
In this way, all right?

 

[ArGeX]

problem is solved. Thank you for your help and support

http://blackcatusb.net/index.php?threads/bcusb-doesnt-connect-to-device.49/page-2#post-673