• Visit https://www.embeddedcomputers.net/ for Hardware; Software and all other things related to FlashcatUSB

Official FCUSB PRO and Classic Latest All in One

Status
Not open for further replies.
Updated build 588 25-10-19
 

Attachments

  • FCUSB_BUILD588_102519.zip
    2.3 MB · Views: 160
Updated build 589 22-11-19
 

Attachments

  • FCUSB_BUILD589_112219.zip
    2.1 MB · Views: 121
Note on build 589. Includes lots of bug fixes. Improved EPROM writing mode (10-12KB/s). Console mode has been changed to work better with Professional (PCB 4.0). MACH1 includes SPI mode (in addition to QUAD SPI mode), and runs at MCU clock speed (32MHz, etc.). QUAD SPI mode has been upgraded to 40MHz max rate. Fixed some translation errors on French. MACH1 includes new logic that implements a PLL, where it will now run at 80MHz. This has been done to increase memory timing, so operations like NAND will now run at 5MB/s (increase from 4MB/s). Note: this was ONLY tested on PCB 2.1 and 2.2, it might be possible that PCB 2.0 no longer works, in which case, contact me to arrange for upgrade.
 
Updated build 590 19-01-20
 

Attachments

  • FCUSB_BUILD590_011920.zip
    2.2 MB · Views: 89
Updated build 591 17-02-20
 

Attachments

  • FCUSB_BUILD591_021720.zip
    2.3 MB · Views: 59
Updated build 592 20-02-20
 

Attachments

  • FCUSB_BUILD592_022020.zip
    2.2 MB · Views: 84
Updated build 593 14-03-20
 

Attachments

  • FCUSB_BUILD593_031420.zip
    2.2 MB · Views: 85
Updated build 595 30-03-20
 

Attachments

  • FCUSB_BUILD595_033020.zip
    2.2 MB · Views: 109
Updated build 600 11-06-20
 

Attachments

  • FCUSB_BUILD600_061120.zip
    2.2 MB · Views: 74
Updated build 602 30-06-20
 

Attachments

  • FCUSB_BUILD602_063020.zip
    2.2 MB · Views: 98
Updated build 603 16-07-20
 

Attachments

  • FCUSB_WIN603_071620.zip
    2.2 MB · Views: 125
Updated build 604 02-08-20
 

Attachments

  • FCUSB_WIN604_080220.zip
    2.1 MB · Views: 82
Updated build 606 01-09-20
 

Attachments

  • FCUSB_WIN606_090120.zip
    2.2 MB · Views: 84
Updated build 608 22-10-20
 

Attachments

  • FCUSB_WIN608_102220.zip
    2.4 MB · Views: 112
Updated Build 615 25-12-20 plus console version

December 25th, 2020: Software has been upgraded to build 615. In addition to the usual updates, a new console version is now available with binaries compiled for Windows and source code that is cross-platform compatible with Linux using the .NET 5.0 Framework.

NOTE: This version of software will make all the older versions unusable due to some registry changes, if you wish to use older versions of the software you will have to do the following enter the registry and delete HKEY_CURRENT_USER\Software\EmbComputers\FlashcatUSB folder.
 

Attachments

  • FCUSB_WIN615_122520.zip
    2.6 MB · Views: 74
  • FCUSB_CONSOLE_122520.zip
    729.8 KB · Views: 27
Last edited:
Updated Build 615 29-12-20 plus console version

XPORT Firmware fixed
 

Attachments

  • FCUSB_WIN615_122920.zip
    2.6 MB · Views: 70
  • FCUSB_CONSOLE_122920.zip
    729.8 KB · Views: 28
Updated Build 617 18-01-21 plus console version
 

Attachments

  • FCUSB_WIN617_011821.zip
    2.6 MB · Views: 43
  • FCUSB_CONSOLE_011821.zip
    730.9 KB · Views: 16
Updated Build 618 19-01-21
 

Attachments

  • FCUSB_WIN618_011921.zip
    2.6 MB · Views: 68
Updated Build 622 19-03-21

March 19th, 2021: Software has been upgraded to build 622. Automatic firmware updating has been added to XPORT and Classic models.
 

Attachments

  • FCUSB_WIN622_031921.zip
    2.2 MB · Views: 83
Last edited:
Status
Not open for further replies.
Back
Top