• Visit https://www.embeddedcomputers.net/ for Hardware; Software and all other things related to FlashcatUSB

problema with dfu spi to jtag blackcat v1.8

Brunozuca

New Member
good afternoon i would like to help some man in the group, or my blackcat usb is only working in serial programmable interface mode, when in dfu mode to apply or hexadecimal to jtag to repair a sb5101 modem it is not allowed after starting a new programming, I've tried it several times and it doesn't change SPI mode to create a nennhuma mode in dfu mode. can anybody help me?
 
PCB v1.x support has been discontinured and on top of that the classic version does not support jtag

If you want jtag for 1.x you need to use an older version of the software that contains a flashable ejtag hex, try some of these builds on this page see if any work

 
friend thanks for the reply. I tested several versions of flashcat and blackcat and none of my programmers left the spi function for jtag. as soon as my blackcat reached the jtag function and rewrote this modem sb5101 and it works perfectly. It is changed the first time to the spi functions for programming or sb6141 modem working 100%. could you or another member help me to program the sb5101 motorola modem with haxorware via spi in the same way to see if it works ??
 
I found this way of flashing but this model is not the same as mine mine is the sb5101 and the video is the sb5101u. in spi mode I can't get the modem memory to be identified.

 
Back
Top