I am requesting support for the 4Mbit version of the AT25DF family of SPI Flash parts. The AT25DF021 and AT25DF081 are supported. I tried manually setting the SPI parameters but no luck.
Part information below:
Chip: AT25DF041A
JEDEC ID: 1F 4401
Log Output
LibUsbDotNet version: 2.2.8.104
FlashcatUSB Script Engine build: 202
Welcome to FlashcatUSB interfacing software, build: 330
Running on: Microsoft Windows 7 Professional (32 bit)
Device connected in SPI mode, firmware version: 3.05
Opening device in SPI Mode 0 (Fosc/2 MSB)
Connected to Flash (JEDEC: 1F 4401)
Part information below:
Chip: AT25DF041A
JEDEC ID: 1F 4401
Log Output
LibUsbDotNet version: 2.2.8.104
FlashcatUSB Script Engine build: 202
Welcome to FlashcatUSB interfacing software, build: 330
Running on: Microsoft Windows 7 Professional (32 bit)
Device connected in SPI mode, firmware version: 3.05
Opening device in SPI Mode 0 (Fosc/2 MSB)
Connected to Flash (JEDEC: 1F 4401)