• Visit https://www.embeddedcomputers.net/ for Hardware; Software and all other things related to FlashcatUSB

rescue 3- 5101n

K

kachymby

New Member
Hello everyone: I need please revive 3 5101n because I could not put haxor with any of the scrips of 5101u. or how I can put the boot to have if light up.gracias
 
Need more information , what are you programming and where ? Paste console info here so i can see if anything has gone wrong.
 
I'm trying to flash 3 sb haxor 5101 with 1.1 n 39 but is the first time I use bcusb, Puerto Rico

blackcat usb (build 304)

blackcat usb status:connected
device mode: spi
board firm version 1.09
connected to device :spicompatible device {c2 2015}
flash memory size: 2,097,152 bytes
flash memory name: mxic mx25l160
and used this tutorials http://blackcatusb.net/threads/flash-sb5101u-in-spi-mode.27/
sorry for my English
 
well mine at least I try to revive the senses with a full 39 the read and write just fine but when I disconnect reboot nothing is off
 
Try using the latest firmware and software build . Build326 and firmware 3.04 . The script for the 5101u is in the new build.
Also are you just flashing haxorware firmware or are you flashing a full dump ?
What version of Hax are you loading ?
 
If you write the full 2MB dump using the spi flash tab , do you get any write error mismatches ??
 
no, well written and checked but still will not start

when I load the script 5101u gives a tab in the tab appears boot, firware, firmware1, cfg hax that you will have a backup but that already have if you turn Haxorware installing it all. thanks
 
You must log in or register to reply here.
Back
Top