• Visit https://www.embeddedcomputers.net/ for Hardware; Software and all other things related to FlashcatUSB

S25FL129P ?

If you connect your BCUSB device , what output does it give you ?
 
Detect as:

FOosc/ 2 MSB
JEDEC: 01 2018
S25FL128P

I can read.. not write.
 
Could you please send me a screen with the manual settings s25fl128p SPI, I try to write manually.
 
Set your BCUSB to 5v and set both your dip switches to the ON position and try to program the chip like that . Let me know the result.
 
I have this s25fl129 in Brazil to take keys.
anyone knows if it is possible
 
Does your BCUSB recognise the chip ? if so then you should be able to read/write to it.
 
chip7

I have this s25fl129 in Brazil to take keys.
anyone knows if it is possible​
Click to expand...
Is 100% possible with blackcat!
I have one BGA24 adapted to blackcat socket.

I can read and write this SPI.
I make experienci one router wr1043nd tplink.
I have removed the original SPi s25fl064 (8MB) and inserted s25fl129P (16MB),the router boot up (dd-wrt instaled) !

Admin.!
How to read or write the OTP address ins S25Fl064 ans S25Fl129P ?
Is any coomands extra?
 
I have spoken to the developer regarding the OTP settings , he has said he will look into it and see if it is possible to add it to the BCUSB code.
 
Braza said:
Is 100% possible with blackcat!
I have one BGA24 adapted to blackcat socket.

I can read and write this SPI.
I make experienci one router wr1043nd tplink.
I have removed the original SPi s25fl064 (8MB) and inserted s25fl129P (16MB),the router boot up (dd-wrt instaled) !

Admin.!
How to read or write the OTP address ins S25Fl064 ans S25Fl129P ?
Is any coomands extra?
Click to expand...




Braza
you can send the information model or link where I can buy this adapted
great need to read data from it.
 
6 soldered wires, each 36 AWG, straight pins in BGA24!
But care is very sensitive!
I believe that the block is protected by some encrypted information in the otp area!
It is necessary that a programmer can read the area!
I believe the blackcat does not read and not write OPT area!

I am Brazilian.

vizinho_cs ok!
 
Braza said:
6 soldered wires, each 36 AWG, straight pins in BGA24!
But care is very sensitive!
I believe that the block is protected by some encrypted information in the otp area!
It is necessary that a programmer can read the area!
I believe the blackcat does not read and not write OPT area!

I am Brazilian.

vizinho_cs ok!
Click to expand...



Braza tbm sou brasileiro
estou tentando ler os decos da embromatel com S25Fl129P
vc ja fez?
 
any help how to use blackcat usb in spi mode..
and also the chip Spansion 25FL128P let me know how to solder the pinouts..
aslo the ST M25P128.. TNX
 
If you look in the documentation folder in the software pack , you will see how it should be connected to an SPI chip.
 
You must log in or register to reply here.
Back
Top