• Visit https://www.embeddedcomputers.net/ for Hardware; Software and all other things related to FlashcatUSB

SB5101 flash not detected

Ok i thought this would happen ,, try this version with this script , tell me if it works ok
 

Attachments

  • FCUSB.RC16.340.zip
    9.2 MB · Views: 72
I can't load the script since it is .bcs extension. Do I just change it to .fcs?
 
Apologies ,, use the rc16.340 software and the script you have from previous rename to .bcs
 
So far it's going good. I used the rc16.340 software and sb5101.fcs script you sent me before.
 
yes , hopefully all went well reboot modem and see if you can access the internal 192 gui
 
Okay. I think something went wrong. Here are the screenshot
help_zps3numjtuu.jpg
 
So still shows as having original firmware on it , when you flashed the modem did it say new firmware installed or did you have any errors ?
 
Hmm strange , it should of loaded it ,,, try flashing again but use the diag firmware this time
 
Did it again still the same. Also in FCUSB under original firmware it says Currently Installed: ecram_sto.bin. I will try the DIAG version now
 
Back
Top