Hey everyone,
I tried to flash Haxorware with Blackcat USB PCB 1.8 to my SB5101i. I using Blackcat software build 326. Blackcat is detecting my device, it finds the BCM3349 but it won't load the script properly. These additional tabs for device don't seeing.
My console log here. Thanks so much for any help.
I tried to flash Haxorware with Blackcat USB PCB 1.8 to my SB5101i. I using Blackcat software build 326. Blackcat is detecting my device, it finds the BCM3349 but it won't load the script properly. These additional tabs for device don't seeing.
My console log here. Thanks so much for any help.
Code:
LibUsbDotNet version: 2.2.8.104
BlackcatUSB Script Engine build: 202
Welcome to BlackcatUSB interfacing software, build: 326
Running on: Microsoft Windows XP Home Edition (32 bit)
Initializing EJTAG engine
Device connected in JTAG mode: 7,05
JTAG: IR length set to 5
JTAG engine setup successfully
Detected CPU ID: 0x334917F IMP CODE: 0x800904
Manufacturer ID: 0xBF Part ID: 0x3349
EJTAG Version support: 2.0
Target device supports DMA mode
Checking for a device specific script to automatically load
Loading script: SB5101_JTAG.bcs
Error loading: Can not process a If statement inside a If statement
No scripts to run