• Seems like hotmail /outlook is blocking emails from here so please refrain from using one of these accounts as you may not receive your authorization email.. many thanks

SBG900 Script

D3m0n

Administrator
Staff member
The script file will have to be made from scratch , i will start on that now , what i need from you is the output in your console tab when you connect the device.
 

D3m0n

Administrator
Staff member
Ok let me start on a script for this device ,,, you should not be trying to write to this device with any other script , you could end up bricking the device. Wait until i post a script here for you to test.
 

D3m0n

Administrator
Staff member
Ok try this "TEST" script. I do not have a SBG900 to test this on , so i am relying on you for feedback . First of all make sure you have a working backup of your modem before you proceed .
Goto your scripts folder and open the Autorun.ini file with notepad and add this line 334817F:SBG900.bcs:SBG900 then save it.
Once you have added the attached script into your script folder , when you start the device and software , you should then be able to choose the SBG900 from the drop down tab.
 

Attachments

maxsteel3000

New Member
I think the modem is already bricked

when i plug in the power supply only 3 yellow leds lit up and then after abt 15-20 secs the go off and stays off.
 

D3m0n

Administrator
Staff member
What Build of BCUSB are you running ?? It seems to be an old version possably Build257 or less , you need to update to the latest Build , plus the new firmware for the BCUSB and try again.
 

maxsteel3000

New Member
Ya i updated n its working now . . .

there is Firmware 1 and 2 how do i do it

trying to put up consola firmware. . .
 

D3m0n

Administrator
Staff member
If your bootloader is not corrupt , all you should have to do is load your firmware file into the write of "Firmware1" let it flash
 

D3m0n

Administrator
Staff member
Possably , I do not know the extent of what you have done to this device , to get it to the bricked stage , but first load the firmware only and see what happens .
 

D3m0n

Administrator
Staff member
Did this script work ok for you ? Were the read /writes error free ?
 

mrbeeper

New Member
Hello guys

I have a bricked sbg900 and i use blackcatusb, i flashed the modem
With a firmware and it got bricked, i had a backup of the original firmware and still bricked, 3 yellow lights, after 5 secs the other light doesnt came up.

I can read the 4mb firmware on the modem so the script i think its working, but i dont know if the
Script supports writing 4mb firmware...

Any help will appreciate
 

D3m0n

Administrator
Staff member
Did you make a backup before you flashed the device ? I do not personally have one of these devices , but i believe there may be issues writing to the device , but as people did not come back to respond to questions it is hard to find the problem.

If you have a working backup try flashing it via the flash tab and see what it says in console tab.
 

D3m0n

Administrator
Staff member
Looking at the console log , it seems as if the Write was successful , are you sure the backup is correct and not corrupt ?
 

mrbeeper

New Member
I have 3 different backups and i think 1 should work, mine and other two working to other ppls on the net
 
Top