• Visit https://www.embeddedcomputers.net/ for Hardware; Software and all other things related to FlashcatUSB

winbond

mac11

Member
hi guys this is the winbond chip from the arris 802 it seems to be a bit different from the xm chip can see if you can make a script for it ? thanks much
 

Attachments

  • winbond backup.zip
    9.8 MB · Views: 47
do you think it is possible demom, i heard thses chips are great if you can get the mapping right
 
It seems to have the exact same mapping as a 802 , So the 802g script should work
 
it is from the 802 but cant be flash the same way i have tried but it just shuts down when i try to put alpha or forceware on it, i know it not an xm chip it says wb on it, tell me what you think
 
It's possable that the issue lies within uboot (bootloader) , there was a similar issue with the A256 and getting Hax to load , you will need to get someone to look into the uboot of the specific dump you loaded and see if it has compatable settings as to what Alpha or Force has been set too.
 
Back
Top