• Visit https://www.embeddedcomputers.net/ for Hardware; Software and all other things related to FlashcatUSB

xbox 360 nand

no it was 16mb hy27us08281a flash but seeing as i could not dump it using a homemade parallel port dumper i assumed i had the not unheard of bad bus
 
hmm very strange that one , as with the first version of the software we were getting a flash config , tell me was that specific 360 still in a working condition ? as the times i could not get a flash detection at all on the 512 model was when i screwed the ecc image load, then i had to short the nand on pins 44-47 (i think) to allow a detection again
 
Is your Jasper a 256 model ?

@ Drew , is your new different xbox a 256 model also ? i am just curious as the 256 was the only one we never tested , so i am hoping there is not an issue in the software relating to this
seems to be a 256, at least i get the same status code drew merc gets, and no flash detected, 0x008A3020 which supposedly is a 256jasper, with 128 internal memory for saves according to it's owner (a friend of mine), here's the nands pic, sorry for the dark photo but the number is still readable, haha

edit: i forgot to mention, the xbox is in working order, no problems there
 

Attachments

  • 20120118_224555.jpg
    20120118_224555.jpg
    1.9 MB · Views: 16
Hmm i wonder if there is an issue with the 256 boxes , i will need to look into this a little further and see if i can get hold of one of them to find the possable issue
 
Hmm i wonder if there is an issue with the 256 boxes , i will need to look into this a little further and see if i can get hold of one of them to find the possable issue
please keep us updated, most likely i'll read the nand of a couple of this units, and my only other choice is using lpt port... and that would take forever haha, thanks for your help!
 
We will look into this , and post here once we can obtain a 256 box ;)
 
Back
Top