• Visit https://www.embeddedcomputers.net/ for Hardware; Software and all other things related to FlashcatUSB

xbox 360 slim Nand READ 16 mg Ok / write image_00000000.ecc in black cat usb

H-Slim22.png nand read 16 mega slin ok


patch create image_00000000.ecc OK


write image_00000000.ecc ? comands in black cat usb ?




someone tell me the command to WRITE image_00000000.ecc in blackcat usb

example start blocks 0x000000 . ending blocks 0x0003ff ??????? is correct ? len : 14a00 blocks :50 004f
 
In BCUSB you are writing in bytes so it is from 0x0 to 0x1351680 . the 1351680 is the amount of bytes in a .ecc image .
 
I try to use this command and post the results 0x0 to 0x1351680



NAND_Flash_(0x00023010)_00-107FFFF.bin 16.896 kb xbox 360 slim

image_00000000.ecc write 0x0 to 0x1351680 ?
 
View attachment 229 nand read 16 mega slin ok


patch create image_00000000.ecc OK


write image_00000000.ecc ? comands in black cat usb ?




someone tell me the command to WRITE image_00000000.ecc in blackcat usb

example start blocks 0x000000 . ending blocks 0x0003ff ??????? is correct ? len : 14a00 blocks :50 004f

hi, where you able to write the nand in the end? how did you got nandpro to recognize blackcat usb? i haven't been able to do that... and i don't want to use blackcat usb own flasher because i don't want to screw up my xbox, lol, any help would be aprreciated, thanks!
 
Nandpro will not see BCUSB they are not compatable.
BCUSB will write your nand with it's own software.
It is just issues with writing the .ecc with BB due to the spare blocks
 
Nandpro will not see BCUSB they are not compatable.
BCUSB will write your nand with it's own software.
It is just issues with writing the .ecc with BB due to the spare blocks
i assumed that, it's because i saw the previous poster using blackcat usb to read/write and nandpro as well... does ecc writing work with blackcatusb? i'm trying on a 16mb slim nand, could you point me on the right direction? i haven't read posts where people talk about being successfull on writing the ecc... thanks!
 
I have managed to write a .ecc to a Falcon 16mb with bcusb no problem. However on the BB Jasper it would not write it as it should , due to the spare blocks. For that i had to use nandpro and another programmer.
If you have a working backup of your flash with no bad blocks , then you can try it out , I did post a script in the script section
http://www.blackcatusb.net/threads/xbox-nand-bcs-model-slim-16-mega-nand.76/
If you are willing to give it a try.
 
I have managed to write a .ecc to a Falcon 16mb with bcusb no problem. However on the BB Jasper it would not write it as it should , due to the spare blocks. For that i had to use nandpro and another programmer.
If you have a working backup of your flash with no bad blocks , then you can try it out , I did post a script in the script section
http://www.blackcatusb.net/threads/xbox-nand-bcs-model-slim-16-mega-nand.76/
If you are willing to give it a try.

thanks, i didn't see that post, i'll try tomorrow on my trinity slim and let you know how it went, i made a clean backup with my bcusb, so i guess if it goes wrong i can go back to normal, lol xD
 
I dont't think you will have an issue with the 16mb nands to be honest , all the issues always seem to be the BB ones. But as you have a backup you can always recover your box.
 
I dont't think you will have an issue with the 16mb nands to be honest , all the issues always seem to be the BB ones. But as you have a backup you can always recover your box.
yup you were right, i had no problem writing the ecc, thanks for the help! now if i could only get more reliable boot times... haha, but that is not bcusb's fault xD
 
Has anyone figured out how to get this to work on the Jasper 512mb ?? Please let me know, thank you!
 
hello. can you tell me how can i write ecc file whit black cat usb. have xenon 16mb flash
 
Back
Top