I need to debrick this router.
The JTAG connection works well and the program recognizes the CPU (BCM 6328).
I'm not able to find the MX25L128 flash (SPI) start address (I'm using a modified default.bcs)...
Here is a boot of a (working) similar device:
http://wiki.openwrt.org/toh/adb/p.dg_a4001n1
Thank you for your help...
Ciao, Piero.
The JTAG connection works well and the program recognizes the CPU (BCM 6328).
Code:
Initializing EJTAG engine
Device connected in JTAG mode: 7,05
JTAG: IR length set to 10
JTAG engine setup successfully
Detected CPU ID: 0xA917F IMP CODE: 0x810904
Manufacturer ID: 0xBF Part ID: 0xA9
EJTAG Version support: 2.0
Target device supports DMA mode
Checking for a device specific script to automatically load
Loading device specific script: default.bcs
Loading script: default.bcs
JTAG: SPI register returned 0x0
MemoryInit: Failed - device parameters failed Init
Setting device parameter (Intel Flash delay) to 0x96
Setting device parameter (AMD Flash delay) to 0x96
Setting device parameter (Memory Read Delay) to 0x64
Here is a boot of a (working) similar device:
http://wiki.openwrt.org/toh/adb/p.dg_a4001n1
Thank you for your help...
Ciao, Piero.