ok not many hair left on my head
, I trace the pins solder wires,double checked them,and still getting spi flash detected,but not supported... every time I press detect device I getting device detection at different addres?!?
someone know what manual settings must be for atmel at45db161b chip? I want to try read it manually.
thank you
this is the log
LibUsbDotNet version: 2.2.8.104
FlashcatUSB Script Engine build: 202
SPI database loaded: 159 devices supported
Welcome to FlashcatUSB interfacing software, build: 345
Running on: Microsoft Windows 7 Ultimate (32 bit)
Device connected in SPI mode, firmware version: 3.05
Opening device in SPI Mode 8 (Fosc/2 MSB)
Connected to Flash (RDID:0x070703 REMS:0x0000)
For read write support email
contact@embeddedcomputers.net with RDID/REMS
Device connected in SPI mode, firmware version: 3.05
Opening device in SPI Mode 0 (Fosc/2 MSB)
Connected to Flash (RDID:0xFFFFFF REMS:0xFFFF)
For read write support email
contact@embeddedcomputers.net with RDID/REMS
Device connected in SPI mode, firmware version: 3.05
Opening device in SPI Mode 8 (Fosc/2 MSB)
Connected to Flash (RDID:0x0F0F0F REMS:0x0000)
For read write support email
contact@embeddedcomputers.net with RDID/REMS
Device connected in SPI mode, firmware version: 3.05
Opening device in SPI Mode 8 (Fosc/2 MSB)
Connected to Flash (RDID:0x1F1F1F REMS:0x0103)
For read write support email
contact@embeddedcomputers.net with RDID/REMS
Device connected in SPI mode, firmware version: 3.05
Opening device in SPI Mode 8 (Fosc/2 MSB)
Connected to Flash (RDID:0x1F0F0F REMS:0x0000)
For read write support email
contact@embeddedcomputers.net with RDID/REMS
Device connected in SPI mode, firmware version: 3.05
Opening device in SPI Mode 8 (Fosc/2 MSB)
Connected to Flash (RDID:0x070F07 REMS:0x0000)
For read write support email
contact@embeddedcomputers.net with RDID/REMS
Device connected in SPI mode, firmware version: 3.05
Opening device in SPI Mode 8 (Fosc/2 MSB)
Connected to Flash (RDID:0x0F0F0F REMS:0x0000)
For read write support email
contact@embeddedcomputers.net with RDID/REMS
Disconnected from FlashcatUSB
Device connected in SPI mode, firmware version: 3.05
Unable to connect to compatible SPI device
Device connected in SPI mode, firmware version: 3.05
Unable to connect to compatible SPI device
Device connected in SPI mode, firmware version: 3.05
Opening device in SPI Mode 8 (Fosc/2 MSB)
Connected to Flash (RDID:0x0F0F1F REMS:0x0000)
For read write support email
contact@embeddedcomputers.net with RDID/REMS
Disconnected from FlashcatUSB
Device connected in SPI mode, firmware version: 3.05
Opening device in SPI Mode 8 (Fosc/2 LSB)
Connected to Flash (RDID:0xE0E0E0 REMS:0x0000)
For read write support email
contact@embeddedcomputers.net with RDID/REMS
Device connected in SPI mode, firmware version: 3.05
Opening device in SPI Mode 8 (Fosc/2 MSB)
Connected to Flash (RDID:0x0F0707 REMS:0x0000)
For read write support email
contact@embeddedcomputers.net with RDID/REMS
Device connected in SPI mode, firmware version: 3.05
Opening device in SPI Mode 8 (Fosc/2 MSB)
Connected to Flash (RDID:0x030301 REMS:0x0000)
For read write support email
contact@embeddedcomputers.net with RDID/REMS
Device connected in SPI mode, firmware version: 3.05
Opening device in SPI Mode 8 (Fosc/2 MSB)
Connected to Flash (RDID:0x1F0F1F REMS:0x0000)
For read write support email
contact@embeddedcomputers.net with RDID/REMS
Device connected in SPI mode, firmware version: 3.05
Opening device in SPI Mode 8 (Fosc/2 MSB)
Connected to Flash (RDID:0x0F0F0F REMS:0x0000)
For read write support email
contact@embeddedcomputers.net with RDID/REMS