• Visit https://www.embeddedcomputers.net/ for Hardware; Software and all other things related to FlashcatUSB

BCUSB PCB 1.5 with SB6120

The pinouts are the same for all versions of bcusb.
There seems to be an issue elsewhere with this , if you can detect the flash without using power to pin2 and have reloaded the dump i sent and you are still having issues , it seems to me like a fault elsewhere on the board , where that is or what it could be is unknown to me ??
 
I just order another modem and should be here sometime next week. For now, I'll put this modem away. Thanks for help D3mOn!
 
Hi D3mOn,

I got my other modem and I was able to save 8mb dump twice and loaded forceWare 1.1r12. It's working great. But for my bricked modem. I've noticed that on NVRAM sector. It has forceware image loaded on it. I think that's the problem why my modem won't boot. I'm able to read with BCUSB, but can't write. Everytime I click on write, It freeze and doesn't do anything. Is there another way I can erase the NVRAM and write in a good file?

Thanks,
 
There is an erase command , i cannot remember it off hand but will try and find out for you
 
hey skyline have you tried the new script for the 6120 yet? you should be able to pull from your good modem and load the NVRAM on the bad one with a good copy.
 
You must log in or register to reply here.
Back
Top