All of my chips are getting identified correctly with the software after I:
1. Unsolder chips from motherboards
2. Made the wires from programmer to chip as short as possible.
All chips have a data, I know that because most of them came from the laptops with EFI lock.
I think the problem with the programmer itself, it doesn't read the data correctly (it doesn't read the data at all), but it does write data just fine, because I did write a data to one of the chips to remove EFI lock and it worked just fire, but when I try to read the data it reads only "FFFFFFF".
I did try to run software and use the programmer on a 4 different USB controllers, so it is not the hardware outside the programmer, I did try 3 different versions of software and the result the same.
I'm going to return this programmer and order the other one.
Thank you for your help!!!