Steve Zingman
New Member
I'm trying to read and then program a 25L40 in a Via APC (http://apc.io/)
The flash according to Via is a MXIC, part no. 25L4006E.
Below is the console log.
I have tried to read the device twice.
When I use the DOS compare (FC)
I get quite a few errors.
I also tried comparing the 2 files with Hex Workshop
Same result.
Any suggestions?
Thanks, Steve
LibUsbDotNet version: 2.2.8.104
FlashcatUSB Script Engine build: 202
Welcome to FlashcatUSB interfacing software, build: 330
Running on: Microsoft Windows 7 Professional (32 bit)
Device connected in SPI mode, firmware version: 3.05
Opening device in SPI Mode 0 (Fosc/2 MSB)
Connected to Flash (JEDEC: C2 2013)
Flash detected: MXIC MX25L40 (524,288 bytes)
Programming mode: SPI (high-speed)
Beginning memory read from SPI Flash
Start address: 0 (0x00) Length: 524289
Read operation complete
Read 524289 bytes in 1.4 seconds, 375,296 Bytes/s
Beginning memory read from SPI Flash
Start address: 0 (0x00) Length: 524289
Read operation complete
Read 524289 bytes in 1.36 seconds, 386,644 Bytes/s
The flash according to Via is a MXIC, part no. 25L4006E.
Below is the console log.
I have tried to read the device twice.
When I use the DOS compare (FC)
I get quite a few errors.
I also tried comparing the 2 files with Hex Workshop
Same result.
Any suggestions?
Thanks, Steve
LibUsbDotNet version: 2.2.8.104
FlashcatUSB Script Engine build: 202
Welcome to FlashcatUSB interfacing software, build: 330
Running on: Microsoft Windows 7 Professional (32 bit)
Device connected in SPI mode, firmware version: 3.05
Opening device in SPI Mode 0 (Fosc/2 MSB)
Connected to Flash (JEDEC: C2 2013)
Flash detected: MXIC MX25L40 (524,288 bytes)
Programming mode: SPI (high-speed)
Beginning memory read from SPI Flash
Start address: 0 (0x00) Length: 524289
Read operation complete
Read 524289 bytes in 1.4 seconds, 375,296 Bytes/s
Beginning memory read from SPI Flash
Start address: 0 (0x00) Length: 524289
Read operation complete
Read 524289 bytes in 1.36 seconds, 386,644 Bytes/s