need help with sb5101

[wqm25]

what can i do?

LibUsbDotNet version: 2.2.8.104
FlashcatUSB Script Engine build: 202
Welcome to FlashcatUSB interfacing software, build: 330
Running on: Microsoft Windows 7 (32 bit)
Initializing EJTAG engine
Device connected in JTAG mode: 7.05
JTAG: IR length set to 5
JTAG engine setup successfully
Detected CPU ID: 0x334917F IMP CODE: 0x800904
Manufacturer ID: 0xBF Part ID: 0x3349
EJTAG Version support: 2.0
Target device supports DMA mode
Checking for a device specific script to automatically load
Loading device specific script: BCM3349_JTAG.bcs
Loading script: BCM3349_JTAG.bcs
Setting device parameter (Intel Flash delay) to 0x32
Setting device parameter (AMD Flash delay) to 0x96
Setting device parameter (Memory Read Delay) to 0x32
MemoryInit: Failed - device parameters failed Init
Error in script BCM3349_JTAG.bcs on line 19
Reason: Error processing: CFGFLASH

 

[D3m0n]

Debricking features on BCUSB are not the best , i am currently working away , but should be home by Friday , i will dig one of these devices out and brick it and see if i can figure out a better debrick option.

Does the modem power up as normal or do the led's come on for a few seconds and then go off ?

 

[wqm25]

yes! the led's come on for a few seconds and then go off

 

[D3m0n]

Can you explain how you bricked yours , so i can try to copy the exact same process.

 

[wqm25]

I put a wrong firmware(5100)with blackcat cable lpt

 

[utopian]

i have 5101 firmware(sb5101n2.7.5.0-ga-00-nosh）, but i cant upload, if you want i can send it to you.