any one come up with the flash for one of these will be ideal and XML
here is the info from serial
U-Boot 1.2.0 (Jul 13 2012 - 19:02:23)
PSPU-Boot 1.0.16.22
DRAM: 128 MB
Spansion S25FL129P flash found
Spansion S25FL129P flash found
Flash: 32 MB
In: serial
Out: serial
Err: serial
Press SPACE to abort autoboot in 0 second(s)
*** ACTIMAGE = 1, will try to boot UBFI1 stored @0x48040000
## Executing script at 48040000
============== Running script =========
*** Running from UBFI1 partition @0x48040000
Load address = 0x480424e8 (0x24e8)
Kernel address = 0x48042534 (0x2534)
kernel size = 0x1066cc
FS address = 0x48148c00 (0x108c00)
FS size = 0x68f400
NVRAM offset = 0xfb0000
NVRAM size = 0x50000
*** UBFI1 bootscript executed successfully.
Start booting...
## Booting image at 480424e8 ...
Image Name: Multi Image File
Image Type: ARM Linux Multi-File Image (uncompressed)
Data Size: 7953112 Bytes = 7.6 MB
Load Address: 80a00000
Entry Point: 80a00000
Contents:
Image 0: 1074892 Bytes = 1 MB
Image 1: 6878208 Bytes = 6.6 MB
Verifying Checksum ... OK
OK
Starting kernel ...
Starting LZMA Uncompression Algorithm.
Compressed file is LZMA format.
U-Boot 1.2.0 (Jul 13 2012 - 19:02:23)
PSPU-Boot 1.0.16.22
DRAM: 128 MB
Spansion S25FL129P flash found
Spansion S25FL129P flash found
Flash: 32 MB
In: serial
Out: serial
Err: serial
Press SPACE to abort autoboot in 0 second(s)
=> help
? - alias for 'help'
autoscr - run script from memory
base - print or set address offset
bdinfo - print Board Info structure
boot - boot default, i.e., run 'bootcmd'
bootd - boot default, i.e., run 'bootcmd'
bootm - boot application image from memory
bootp - boot image via network using BootP/TFTP protocol
cmp - memory compare
coninfo - print console devices and information
cp - memory copy
crc32 - checksum calculation
echo - echo args to console
erase - erase FLASH memory
eval - return addition/subraction
exit - exit script
flinfo - print FLASH memory information
go - start application at address 'addr'
help - print online help
icrc32 - checksum calculation
iloop - infinite loop on address range
imd - i2c memory display
iminfo - print header information for application image
imls - list all images found in flash
imm - i2c memory modify (auto-incrementing)
imw - memory write (fill)
inm - memory modify (constant address)
iprobe - probe to discover valid I2C chip addresses
itest - return true/false on integer compare
loadb - load binary file over serial line (kermit mode)
loads - load S-Record file over serial line
loady - load binary file over serial line (ymodem mode)
loop - infinite loop on address range
md - memory display
mm - memory modify (auto-incrementing)
mtest - simple RAM test
mw - memory write (fill)
nm - memory modify (constant address)
printenv- print environment variables
protect - enable or disable FLASH write protection
rarpboot- boot image via network using RARP/TFTP protocol
reset - Perform RESET of the CPU
run - run commands in an environment variable
saveenv - save environment variables to persistent storage
setenv - set environment variables
sleep - delay execution for some time
test - minimal test like /bin/sh
tftpboot- boot image via network using TFTP protocol
version - print monitor version
here is the info from serial
U-Boot 1.2.0 (Jul 13 2012 - 19:02:23)
PSPU-Boot 1.0.16.22
DRAM: 128 MB
Spansion S25FL129P flash found
Spansion S25FL129P flash found
Flash: 32 MB
In: serial
Out: serial
Err: serial
Press SPACE to abort autoboot in 0 second(s)
*** ACTIMAGE = 1, will try to boot UBFI1 stored @0x48040000
## Executing script at 48040000
============== Running script =========
*** Running from UBFI1 partition @0x48040000
Load address = 0x480424e8 (0x24e8)
Kernel address = 0x48042534 (0x2534)
kernel size = 0x1066cc
FS address = 0x48148c00 (0x108c00)
FS size = 0x68f400
NVRAM offset = 0xfb0000
NVRAM size = 0x50000
*** UBFI1 bootscript executed successfully.
Start booting...
## Booting image at 480424e8 ...
Image Name: Multi Image File
Image Type: ARM Linux Multi-File Image (uncompressed)
Data Size: 7953112 Bytes = 7.6 MB
Load Address: 80a00000
Entry Point: 80a00000
Contents:
Image 0: 1074892 Bytes = 1 MB
Image 1: 6878208 Bytes = 6.6 MB
Verifying Checksum ... OK
OK
Starting kernel ...
Starting LZMA Uncompression Algorithm.
Compressed file is LZMA format.
U-Boot 1.2.0 (Jul 13 2012 - 19:02:23)
PSPU-Boot 1.0.16.22
DRAM: 128 MB
Spansion S25FL129P flash found
Spansion S25FL129P flash found
Flash: 32 MB
In: serial
Out: serial
Err: serial
Press SPACE to abort autoboot in 0 second(s)
=> help
? - alias for 'help'
autoscr - run script from memory
base - print or set address offset
bdinfo - print Board Info structure
boot - boot default, i.e., run 'bootcmd'
bootd - boot default, i.e., run 'bootcmd'
bootm - boot application image from memory
bootp - boot image via network using BootP/TFTP protocol
cmp - memory compare
coninfo - print console devices and information
cp - memory copy
crc32 - checksum calculation
echo - echo args to console
erase - erase FLASH memory
eval - return addition/subraction
exit - exit script
flinfo - print FLASH memory information
go - start application at address 'addr'
help - print online help
icrc32 - checksum calculation
iloop - infinite loop on address range
imd - i2c memory display
iminfo - print header information for application image
imls - list all images found in flash
imm - i2c memory modify (auto-incrementing)
imw - memory write (fill)
inm - memory modify (constant address)
iprobe - probe to discover valid I2C chip addresses
itest - return true/false on integer compare
loadb - load binary file over serial line (kermit mode)
loads - load S-Record file over serial line
loady - load binary file over serial line (ymodem mode)
loop - infinite loop on address range
md - memory display
mm - memory modify (auto-incrementing)
mtest - simple RAM test
mw - memory write (fill)
nm - memory modify (constant address)
printenv- print environment variables
protect - enable or disable FLASH write protection
rarpboot- boot image via network using RARP/TFTP protocol
reset - Perform RESET of the CPU
run - run commands in an environment variable
saveenv - save environment variables to persistent storage
setenv - set environment variables
sleep - delay execution for some time
test - minimal test like /bin/sh
tftpboot- boot image via network using TFTP protocol
version - print monitor version
