Not detected - M29F160FT

[enpeaphor]

Hello,

I'm having an issue with my Micron M29F160FT chips not being detected/not in flash library.
I'm using a FlashcatUSB XPORT with TSOP-48 (NOR X8) and TSOP-48 (NOR X16) adapters.

I have flashed multiple AM29F016D chips using these, so I'm pretty sure the device is the correct way around and it's also set to 5V.
If I flip the orientation of the M29F160FT so the dot is on the opposite side, I get the message that the device is detected but not within the Flash library.

So, I'm wondering do I have the correct adapter for this chip, or are there any extra settings I need to change?

---

Spoiler: 'correct' orientation log NOR X8

Disconnected from FlashcatUSB XPORT device
Connected to FlashcatUSB XPORT, firmware version: 5.31
Detecting connected Flash device...
Initializing Parallel NOR device mode
I/O mode successfully initialized
Attempting to automatically detect Flash device
Flash device not detected in Parallel I/O mode

Spoiler: 'incorrect' orientation log NOR X8

Disconnected from FlashcatUSB XPORT device
Connected to FlashcatUSB XPORT, firmware version: 5.31
Detecting connected Flash device...
Initializing Parallel NOR device mode
I/O mode successfully initialized
Attempting to automatically detect Flash device
Mode NOR X16 (Word addressing) returned ident code: 0xDFFFDFDFDF
Mode NOR X16 (Byte addressing) returned ident code: 0xDFFFDFDFDA
Mode NOR X8 (A0 addressing) returned ident code: 0xDF00DFDFDF
Mode NOR X8 (A-1 addressing) returned ident code: 0xDF00DFDFDF
Connected to Flash (CHIP ID: 0xDF00DFDFDF)
Common Flash Interface information not present
Flash memory detected but not found in Flash library

 

[enpeaphor]

Apologies!!! - Ignore me.
I must have not seated the chip correctly. I was copying across the logs and it's picked it up using the X16 adapter.

I'm not sure how to delete/archive a thread.