1) Fixed a bug where you would select a large file (larger than the target flash), and the console would calculate the speed or BPS via the large file, and not the actual amount of data that was written.
2) Added new features to the SPI Manual Config tab. Including programming modes: Page (writes all 512 bytes at once), Byte (one byte at a time), and AAI (Auto Word Increment).
3) Added 2 SPI devices that were previously not supported: SST 25VF010A and SST 25VF020A
These two flashes use a very proprietary method to program. They require a special command to be sent prior to unlock the flash lock bits.
http://www.embeddedcomputers.net/products/BlackcatUSB/BCUSB.Build275.zip
2) Added new features to the SPI Manual Config tab. Including programming modes: Page (writes all 512 bytes at once), Byte (one byte at a time), and AAI (Auto Word Increment).
3) Added 2 SPI devices that were previously not supported: SST 25VF010A and SST 25VF020A
These two flashes use a very proprietary method to program. They require a special command to be sent prior to unlock the flash lock bits.
http://www.embeddedcomputers.net/products/BlackcatUSB/BCUSB.Build275.zip