possible to flash bitstream on a progskeet with bcusb

[john allen cooke]

is it possible to flash the bitstream on a progskeet with a bcusb, the progskeet has gnd/tdo/trst/tms/tdi/tck/3.6v which the bcusb has in ejtag mode so i didn't know if it was a matter of just adding the flash compatibility to bcusb

 

[john allen cooke]

must be compatible with ACTEL A3P chip

 

[D3m0n]

I know it is not supported at present , but if you connect your BCUSB to the device , what output does it give you in the console tab. It may be possable to add it , but the developer would need to look into this to verify.

Just Checked and that specific Chip is ARM based , so BCUSB will not be able to do it at present as we have no ARM code implemented.