Hello Guys,
Need some guidance here , I am new to flashcat , please help me to work out, how to write to Cypress S29GL128P . The reading of the chip was fine , I used the default settings that flashcat started with , except for changing the Mode to Parallel FLASH (NOR/NAND) . I had several chips one from ST and another from Spanson , all of them read fine . Anyway I got 16Mb worth of data that looked like it made sense .
I was able to erase it successfully , and got all FF's .
When trying to write my prepared bin file to chip , I am not getting any luck . It looks like it is trying to start writing :
then it fails :
One thing I did notice is when I look at the CFI information , this Cypress chip does not have the programm/ersase voltage listed , the ST chip did :
Anyway I am not sure if it is relevant , as the chip seemed to erase fine .
To initiate writing I am using the button on the NOR Flash tab :
Is that the correct way to do it or use the tools menu ?
Much Appreciate any help , I have been struggling with it all day , and have run out of ideas .
Best Regards
Mil4898
Need some guidance here , I am new to flashcat , please help me to work out, how to write to Cypress S29GL128P . The reading of the chip was fine , I used the default settings that flashcat started with , except for changing the Mode to Parallel FLASH (NOR/NAND) . I had several chips one from ST and another from Spanson , all of them read fine . Anyway I got 16Mb worth of data that looked like it made sense .
I was able to erase it successfully , and got all FF's .
When trying to write my prepared bin file to chip , I am not getting any luck . It looks like it is trying to start writing :
then it fails :
One thing I did notice is when I look at the CFI information , this Cypress chip does not have the programm/ersase voltage listed , the ST chip did :
Anyway I am not sure if it is relevant , as the chip seemed to erase fine .
To initiate writing I am using the button on the NOR Flash tab :
Is that the correct way to do it or use the tools menu ?
Much Appreciate any help , I have been struggling with it all day , and have run out of ideas .
Best Regards
Mil4898