• Seems like hotmail /outlook is blocking emails from here so please refrain from using one of these accounts as you may not receive your authorization email.. many thanks

WGR612 v5 Script JTAG

Status
Not open for further replies.

D3m0n

Administrator
Staff member
# Script file for Netgear WGR-614 v5 - 535017F
# Processor is a Broadcom BCM5350
# Board needs 4x 4.7 K resistors soldered onto blank pads next to J202 (TAP)
# JTAG TAP: Pin 1 (TRST), Pin 3 (TDI), Pin 5 (TDO), Pin 7 (TMS), Pin 9 (TCK), Pin 2 (GND)

MyDevice = "Netgear WGR614v5" #Name of device

SetParam(1,100) #Sets the Intel flash delay
SetParam(2,200) #Sets the AMD flash delay
SetParam(3,100) #Sets the DMA read delay

JTAG.LittleEndian #Sets the device endian

JTAG.MemoryAddress(0x1FC00000)
JTAG.MemoryType("RAM")
JTAG.MemorySize(0x100000)
CFGMEM = JTAG.MemoryInit()

JTAG.MemoryAddress(0x1FC00000)
JTAG.MemoryType("CFI")
CFGFLASH = JTAG.MemoryInit()
 

Attachments

Status
Not open for further replies.
Top