# Script file for Netgear WGR-614 v5 - 535017F
# Processor is a Broadcom BCM5350
# Board needs 4x 4.7 K resistors soldered onto blank pads next to J202 (TAP)
# JTAG TAP: Pin 1 (TRST), Pin 3 (TDI), Pin 5 (TDO), Pin 7 (TMS), Pin 9 (TCK), Pin 2 (GND)
MyDevice = "Netgear WGR614v5" #Name of device
SetParam(1,100) #Sets the Intel flash delay
SetParam(2,200) #Sets the AMD flash delay
SetParam(3,100) #Sets the DMA read delay
JTAG.LittleEndian #Sets the device endian
JTAG.MemoryAddress(0x1FC00000)
JTAG.MemoryType("RAM")
JTAG.MemorySize(0x100000)
CFGMEM = JTAG.MemoryInit()
JTAG.MemoryAddress(0x1FC00000)
JTAG.MemoryType("CFI")
CFGFLASH = JTAG.MemoryInit()
# Processor is a Broadcom BCM5350
# Board needs 4x 4.7 K resistors soldered onto blank pads next to J202 (TAP)
# JTAG TAP: Pin 1 (TRST), Pin 3 (TDI), Pin 5 (TDO), Pin 7 (TMS), Pin 9 (TCK), Pin 2 (GND)
MyDevice = "Netgear WGR614v5" #Name of device
SetParam(1,100) #Sets the Intel flash delay
SetParam(2,200) #Sets the AMD flash delay
SetParam(3,100) #Sets the DMA read delay
JTAG.LittleEndian #Sets the device endian
JTAG.MemoryAddress(0x1FC00000)
JTAG.MemoryType("RAM")
JTAG.MemorySize(0x100000)
CFGMEM = JTAG.MemoryInit()
JTAG.MemoryAddress(0x1FC00000)
JTAG.MemoryType("CFI")
CFGFLASH = JTAG.MemoryInit()