You should already be able to flash this modem with the bcusb , as it will use the same connections as this
, the only difference will be is that your ISP point will connect on VCC on BCUSB , there is no script for this as yet , but should be easy enough to make.[/q was trying to make a script for the cisco but i failed badly can someone post it if the have it thanksCode:
Do you get a detection with the bcusb ? give me a few days and i will make you a test script , i am working away so time is limited.
I will also continue the tutorial on making your own scripts soon , hopefully this will make it easier for some.
I have also spoken to the developer and he may in the near future make another application for easy script generation .
Have just started working on this script , it is quite big as i am following the sequance used by NT software , it may take a day or 2 as i have to juggle this between work , but i have the basics loaded.
Slight ammendment to the script itself , I inadvertently added a read command on the write command for the UBFI1 and UBFI2 sectors. I have rectified this now , please try this script
No problem , good luck in Boston , hopefully someone else will be able to help test this while you are away.
Try this script out , once again add the script and the jpeg to the script folder.
Were you able to read the boot, cfg, firm ,firm1 and log and then write them back ?
You will not be able to load flash from a dpc3000 if it does not have the same CPU as the 3212.