• Visit https://www.embeddedcomputers.net/ for Hardware; Software and all other things related to FlashcatUSB

Netgear CG814CCR v2

Very strange , when you start the software , does it automatically start the new script or does it revert to the default script ?
 
My scripts folder is like the screenshot is yours similar ?

 
But if you remove the info from the autorun ini file then your script is not visable in the dropdown correct ?

 
I have it working now....

I deleted and readded the info

it shows the menu now!!!!!!:D:D

Must have been something in the Autorun.ini
 
When you do the reads , do they show as having details in the saved file ? , can you upload them here . If you do a write with your full dump on BC does that spit out any errors ?
 
If you get write errors from your full dump there is a possibility that it is corrupt , hence the write fails , if you can get modem back to it's working state it may be worth taking a few dumps to compare to see if there is a glitch somewhere.

Unfortunately i am not the maker of the software , so i am not aware of the functions it has installed in it's code , so i can not tell you if the fault is in the software or not.
 
NP

I will keep testing :)

I think my Flash is bad

I cat write with anything...

no boot
no image1
no image2

I have another cg on the way

I will have to wait till I get it...
 
Have you tried to find an original working full dump and tried to reload that , see if that works ok ??
 
Do me a favour then , do you still have the Haxorware firmware image you used to load on the modem ? If so try and load that onto the firmware tab see if that loads without any errors
 
You must log in or register to reply here.
Back
Top